Series covering making a Frisco 739 from a PFM NP 4-6-0

Discussion in '4-6-0 Ten Wheeler' started by frisco1522, Jan 19, 2012.

  1. yardmaster

    yardmaster Administrator Staff Member Administrator Supporter

    Don, what technique do you use for attaching the safety chains on the tender trucks?

    In a word...fabulous! Need to get cranking on my 4-6-2 that's been in the backshop for an eternity.

    Best Regards,
  2. Sirfoldalot

    Sirfoldalot Supporter Supporter

    Wow, Wow, Wow - You may not be able to play a musical instrument, nor dance very well ... but your shortfalls are more than made up via your use with a torch and back shop abilities. A real treasure!
  3. Karl

    Karl 2008 Engineer of the Year Supporter

    She's a sweetheart. She looks even better in person.
  4. frisco1522

    frisco1522 Staff Member Staff Member

    I soldered one end of the chain to the trucks and soldered a .010 piece of wire on the tender frame and threaded the other end of the chain onto it and put a dab of canopy cement on that end so the trucks can be removed if needed.
  5. frisco1522

    frisco1522 Staff Member Staff Member

    Old B&W shot.

    Attached Files:

Share This Page