Clinton Subdivision - Telegraph Poles And Wire Lines

Discussion in 'Clinton Subdivision' started by dricketts, May 12, 2011.

  1. dricketts

    dricketts Member Frisco.org Supporter

    I was wondering if the Frisco had any kind of standard as to where their telegraph poles were placed along trackage. I was thinking about using a 4 wire setup like the one pictured.

    trainz 2011-05-12 21-03-01-14.jpg trainz 2011-05-12 21-02-36-14.jpg
     
  2. yardmaster

    yardmaster Administrator Staff Member Administrator Frisco.org Supporter

    Derrick,

    From the field notes that Karl Brand's father made (maps posted for various towns), it appears that all of the line poles were on the west side of the track.

    The only photo that I can find of line poles on the Clinton Sub is the photo of the yard that Dale Rush has shared.

    http://www.frisco.org/vb/attachment.php?attachmentid=6415&d=1234639654

    Based off of this photo, I'd say that a 4-wire setup is "good enough."

    Good luck!

    Best Regards,
     
    Last edited by a moderator: Dec 16, 2023
  3. dricketts

    dricketts Member Frisco.org Supporter

    Thanks. I noticed the same thing from Karl's father's notes. I just wasn't too familiar with what was used. 4-wire it is...
     
  4. dricketts

    dricketts Member Frisco.org Supporter

    Another question on this topic. How did telegraph wires cross rivers? Like the Osage River for example.
     
  5. frisco1522

    frisco1522 Staff Member Staff Member

    Lines crossed with the bridge.
     
  6. Karl

    Karl 2008 Engineer of the Year Frisco.org Supporter

    Please see this link for a general discussions regarding pole line placement.

    Telegraph pole Spacing standard

    On the Clinton Sub the pole line was placed as follows:

    MP D3-D27+9 poles, West side of track
    M D27+10 poles - D43+7 poles, East side of track
    MP D43+8 poles - D118 + 6 poles, West side of track
    MP D118+7 poles - D120+21 poles, East side of track
    MP D120+22 poles - D153+19 poles, West side of track
    MP D153+20 poles - Johnston Ave (JA Junction) Springfield D191+20 poles, East side of track

    I have three comments with regard to the poles that you're using in your drawings. Guy lines were not used on every pole; the Frisco poles didn't have the "peg steps". The "cap" on the pole wasn't used either.
     
    Last edited by a moderator: Dec 16, 2023
  7. TAG1014 (Tom Galbraith RIP 7/15/2020)

    TAG1014 (Tom Galbraith RIP 7/15/2020) Passed Away July 15, 2020 Frisco.org Supporter

    Karl,

    I noticed some of your father's maps don't have poles. Are those cases where the wires ran away from the tracks and right of way?

    Thanks, Tom
     
    Last edited by a moderator: Dec 16, 2023
  8. dricketts

    dricketts Member Frisco.org Supporter

    Thanks for the additional info and link Karl. Very helpful. I've found some additional poles that look much more prototypical for the Frisco.

    trainz 2011-05-14 00-40-35-08.jpg
     
  9. dricketts

    dricketts Member Frisco.org Supporter

    I have another question about telegraph poles and wires along the highline. Was the Frisco railroad pretty good about keep trees trimmed and cut back away from the track right away?

    Thanks in advance for any responses.
     
  10. Karl

    Karl 2008 Engineer of the Year Frisco.org Supporter

    No.
     
    Last edited by a moderator: Dec 16, 2023
  11. qaprr

    qaprr Member Frisco.org Supporter

    Early on the Frisco had line crews that cut brush and trees from the pole lines, grade crossings were cut with tractor mowers or by hand and the ROW cut with mowers and by hand. Later most weed and brush control was performed with spray trains, & trucks and on-track mowers.

    As the pole lines were abandoned the line crews were abolished and brush was allowed to grow under the pole lines. Sight distance at grade crossings was always maintained. Primary lines were well maintained, secondary lines such as the Clinton Sub were not as well maintained.

    Mike L
     
    Last edited by a moderator: Dec 16, 2023

Share This Page