Alco RS-3 - Locomotive Model Not Owned By The Frisco - Inquiry

Discussion in 'RS2' started by Iantha_Branch, Sep 30, 2009.

  1. Iantha_Branch

    Iantha_Branch Member

    I saw a link to Mike/s web site on the ballast car thread.

    I did some looking around on the site, and found a section of RS-3s.

    I thought Frisco never bought any.

    Are these "RS-3s" the RS-1s and RD-2s with EMD 576 engines in them?
     
    Last edited by a moderator: Feb 13, 2024
  2. bob_wintle

    bob_wintle Member Frisco.org Supporter

    Ethan.

    The Frisco did not have any RS-3s.

    They did have RS-1s and RS-2s. The RS-2s 550-554 were repowered by EMD in 1959 and 1960. They had EMD 16-567-C engines in them.

    This Information can be found in the book Frisco Diesel Power by Louis Marre and John Harper. The book is the guide for Frisco diesel information. I highly recommend that you try to get one if you can find one. It is out of print and rather pricey.

    Bob Wintle
     
    Last edited by a moderator: Feb 13, 2024
  3. gna

    gna Member Frisco.org Supporter

    I went and looked at Mike Condren's site, and I believe he is in error.

    As Bob states, 5SLSF 50-554 were RS-2s. Prowling around his site are some pictures of SLSF 554 in its original, Alco scheme. Hmmm, let me look. Well, it was in his paint shop columns on his old site. I did find this link.

    http://condrenrails.com/FSVB/Engine-Terminals/Frisco-Engine-Terminal.htm

    Scroll down, and there is a picture of SLSF 554 on the turntable, and he identifies it as an RS-2 rebuilt with a 567 engine by EMD.

    Most people refer to the reengined RS-2s as a RS-2m. You may run across mention of "Morphrodites," too. MKT and Rock Island also reengined Alcos with EMD prime movers, and some of the MKT's were RS-3s, I think, so perhaps that is where the confusion comes in.

    You could also find Frisco in Color, which has some nice pictures and good information in it.
     
    Last edited by a moderator: Feb 13, 2024
  4. meteor910

    meteor910 2009 Engineer of the Year Staff Member Frisco.org Supporter

    The Frisco never repowered their ex-AT&N RS-1s.

    They used the 1000 HP Alco 539 engine which was a reliable and proven unit and gave little trouble. The later RS-2s used the new 1500HP Alco 244 engine. It was also in the FA-1s and FB-1s. They were a nightmare - turbo troubles, crankshaft troubles, piston troubles, etc.

    Hence, many of the FA-1s and FB-1s, and all five of the RS-2s, were re-engined with EMD 16-567-C engines. They were indeed RS-2ms, but the SLSF had them in the same class category as their GP7s.

    After their experience with the 244, the Frisco never went back to Alco for more. No RS-3s, no FA-2 or FB-2s, and alas, no PAs.

    Ken
     
    Last edited by a moderator: Feb 13, 2024
  5. gna

    gna Member Frisco.org Supporter

    On your railroad the Frisco could have run PAs, along with an E8B in the famous horse scheme....hmmm. :)

    My Frisco may get an Erie-Built in the famous horse scheme.
     
    Last edited by a moderator: Feb 13, 2024
  6. meteor910

    meteor910 2009 Engineer of the Year Staff Member Frisco.org Supporter

    I agree.

    A "famous horse" PA would be a clear winner. The best looking diesel locomotive combined with one of the best, and most unique, looking paint schemes. Hmmm.

    Wonder if I can still get an undecorated P2K PA-1?

    I do have two GM&O's, but they look pretty good too.

    I think the famous horse scheme on an Erie-Built would look just fine. Go for it.

    I have had the proposed SLSF E8B sitting here for over five years. Time to get it finished!

    They really should have tried a few of those.

    Ken
     
    Last edited by a moderator: Feb 13, 2024
  7. Iantha_Branch

    Iantha_Branch Member

    I like the idea. :cool:
     
    Last edited by a moderator: Feb 13, 2024

Share This Page