Caboose BN 12230 - Faux Frisco Paint - Sulligent, AL

Discussion in 'Cabooses General' started by trainchaser007 (Brandon Adams RIP 9/22/2017), Sep 19, 2011.

  1. trainchaser007 (Brandon Adams RIP 9/22/2017)

    trainchaser007 (Brandon Adams RIP 9/22/2017) Passed away September 22, 2017

    The BN caboose that was donated to Sulligent, AL and repainted as a red and black Frisco caboose is getting a fresh coat of paint and new decals.

    It needed it! This is apparently being done in preparation for "Old Fashion Day", an annual festival -the first Saturday on October. Train crews often stop for BBQ - adding a new element to the idea of "drive-thru"!

    A contractor from our church won the bid. If it were a true Frisco caboose, I would offer to help just for fun. Oh well, he can paint that "green monster" himself. Did I just say, "green monster"? Anyway, I would take a green monster or even a modern "pumpkin" caboose over a stinking flashing rear end device (FRED) any day. Stinking FREDs!

    In other news, the last few days have been active for me. About 12:30 pm on 9/15, I saw a BNSF coal consist northbound on the Norfolk Southern (NS) in Bear Creek, AL, between Jasper and Florence. I teach there 1/2 day and I can railfan from inside my classroom.

    Students think I am crazy! HA! I rarely see anything "orange" on the NS there.

    Then on 9/17, I happened to be at the right place at the right time and saw a crew change take place in Sulligent. Not unheard of, but that does not happen often.

    Also on 9/17, I did a little tweaking on my 12' long 4-8-2 BBQ grill and smoker to help the casters underneath roll easier. I am trying to prepare it for its second front yard static display for the Christmas season.

    Actually, the darn thing is so heavy that I am just trying to make it easier on myself to roll it from underneath the carport to the sidewalk in front of the house. I will probably have to pull it with the lawn mower. Now there is a double header - a 1980 Snapper and a loosely modeled 1926 Baldwin!

    On 9/18, I went to check out the progress on the caboose paint job and along came a mixed consist, a sight becoming all too uncommon on the Birmingham Subdivision now days.

    I also put 2 structure kits together this weekend, A sand bunker and water tower and a lumber yard shed with office. I have a modeling tip from the experience. Be careful with Xacto knives! When you stab your other hand by about 1/2", it HURTS LIKE HECK!

    I am ok though. I played piano at church last night less than an hour after the accident so it could have been worse.
    Well, as Porky Pig would say, "That's all folks."

    Ship it on the Frisco!
     
    Last edited by a moderator: May 12, 2024 at 7:11 PM
  2. yardmaster

    yardmaster Administrator Staff Member Administrator Frisco.org Supporter

    Brandon,

    I learned a similar lesson in that, when I wear shorts in the summertime, I need to make sure that the #11 blade stays over the workbench, or that my legs stay safely under the workbench.

    Safety First.jpg
     
    Last edited by a moderator: May 12, 2024 at 6:57 PM
  3. trainchaser007 (Brandon Adams RIP 9/22/2017)

    trainchaser007 (Brandon Adams RIP 9/22/2017) Passed away September 22, 2017

    Yardmaster,

    Your attachment of the Frisco Safety First logo after my Xacto knife story is priceless!
     
    Last edited by a moderator: May 12, 2024 at 7:12 PM
  4. caboose9

    caboose9 Member

    That caboose is BN 12230, built by Pacific Car and Foundry (PC&F), 7/1978, as fake SLSF.

    It is located at 120 East Front Street, Sulligent, AL.
     
    Last edited by a moderator: May 12, 2024 at 6:56 PM

Share This Page