Dismiss Notice
PLEASE READ THIS THREAD REGARDING SITE FUNDING AND SERVER CHANGES
Dismiss Notice
ANOTHER GREAT FRISCO RAFFLE!

Layout progress

Filters:

Type:
Image Uploads x
Remove All Filters:
x
Sort By: Date

Sort By...

Filters

Type Filters

benchwork 2 : This morning, I went out to the garage to begin disassembling this corner unit so I could move it to the basement. I was in for a surpri
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 2 : This morning, I went out to the garage to begin disassembling this corner unit so I could move it to the basement. I was in for a surpri

0
2K
2
0
30 Jun 2013
benchwork 3: Surprise! It turns out that there is more than one type of Liquid Nails for Projects. I wasn't paying attention, and I did NOT pick up th
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 3: Surprise! It turns out that there is more than one type of Liquid Nails for Projects. I wasn't paying attention, and I did NOT pick up th

1
2K
2
0
30 Jun 2013
benchwork 4 : So, I switched to what I had on-hand: yellow wood glue. Fortunately, the nearly-dry Liquid Nails matches up with the furrows created in
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 4 : So, I switched to what I had on-hand: yellow wood glue. Fortunately, the nearly-dry Liquid Nails matches up with the furrows created in

0
2K
2
0
30 Jun 2013
benchwork 5 : So, the foam and wood underlayment are inverted and on the garage floor while the yellow glue sets up. The five blocks are used to align
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 5 : So, the foam and wood underlayment are inverted and on the garage floor while the yellow glue sets up. The five blocks are used to align

0
2K
2
0
30 Jun 2013
benchwork 6 : My modifications to the Mod-U-Rail stand are as follows: 1) I cut longer legs (48") to raise the layout closer to eye level; 2) I used t
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 6 : My modifications to the Mod-U-Rail stand are as follows: 1) I cut longer legs (48") to raise the layout closer to eye level; 2) I used t

0
3K
2
0
30 Jun 2013
benchwork 7 : ... and I used carriage bolts, washers, and nuts on other portions of the stand to allow for easier storage and transportation.
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 7 : ... and I used carriage bolts, washers, and nuts on other portions of the stand to allow for easier storage and transportation.

0
2K
0
0
30 Jun 2013
benchwork 8 : This is the front side of the stand, which is screwed and glued. It connects to the straight sides with bolts. I'm sure I could have sav
Bruce Adams

Bruce Adams

Layout progress
0 x

benchwork 8 : This is the front side of the stand, which is screwed and glued. It connects to the straight sides with bolts. I'm sure I could have sav

0
2K
2
0
30 Jun 2013
Sculptamold 1: When the foil was peeled back, I had results I would call acceptable. My plan is to make Lightweight Hydrocal castings of prominent roc
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 1: When the foil was peeled back, I had results I would call acceptable. My plan is to make Lightweight Hydrocal castings of prominent roc

0
2K
2
0
23 Jun 2013
Sculptamold 2: During my search for tips on using this product, I found another neat technique: After applying Sculptamold to a vertical surface to si
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 2: During my search for tips on using this product, I found another neat technique: After applying Sculptamold to a vertical surface to si

0
2K
1
0
23 Jun 2013
Sculptamold 3: ... and it worked great! After this is painted and landscaped, the structure won't look like it's just sitting on top of the ground. Wh
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 3: ... and it worked great! After this is painted and landscaped, the structure won't look like it's just sitting on top of the ground. Wh

0
2K
3
0
23 Jun 2013
Sculptamold 4: I knew I wanted to have my structure foundations embedded in the Sculptamold base, but many of my structures are already partially pain
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 4: I knew I wanted to have my structure foundations embedded in the Sculptamold base, but many of my structures are already partially pain

0
2K
0
0
23 Jun 2013
Sculptamold 5: I wish I owned stock in masking tape! I used tape and paper towels to protect the track from the plaster (though I was pretty tidy toda
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 5: I wish I owned stock in masking tape! I used tape and paper towels to protect the track from the plaster (though I was pretty tidy toda

0
2K
0
0
23 Jun 2013
Sculptamold 6: Preparing to do a little terrain creation using Amaco Sculptamold. This is a new product for me, so I'm having fun experimenting with i
Bruce Adams

Bruce Adams

Layout progress
0 x

Sculptamold 6: Preparing to do a little terrain creation using Amaco Sculptamold. This is a new product for me, so I'm having fun experimenting with i

0
2K
1
0
23 Jun 2013
SBS test 1 The engineer is creeping past the clearance point, but it's only for a signal demonstration. Any second now, the track occupancy circuit w
Bruce Adams

Bruce Adams

Layout progress
0 x

SBS test 1 The engineer is creeping past the clearance point, but it's only for a signal demonstration. Any second now, the track occupancy circuit w

0
2K
2
0
18 Jun 2013
SBS test 2 Frisco #100, an Athearn Genesis GP15-1, splits the signals. My layout has been in a "holding pattern" until today, as I needed to sort out
Bruce Adams

Bruce Adams

Layout progress
0 x

SBS test 2 Frisco #100, an Athearn Genesis GP15-1, splits the signals. My layout has been in a "holding pattern" until today, as I needed to sort out

0
2K
2
0
18 Jun 2013
This device is what makes the signal system work, but was also one of my big hurdles. It handles all the signal logic, and it uses changes in track vo
Bruce Adams

Bruce Adams

Layout progress
0 x

This device is what makes the signal system work, but was also one of my big hurdles. It handles all the signal logic, and it uses changes in track vo

0
2K
1
0
18 Jun 2013
Bruce Adams, Jun 18, 2013
Joe Lovett likes this.
Page 2 of 2
    There are no comments to display.