Quick question

Discussion in 'DCC' started by Iantha_Branch, Feb 21, 2013.

  1. Iantha_Branch

    Iantha_Branch Member

    Today, I finished the install of sound into my SD40-2. Well I should say finished installing lights. Now that I've got everything wired up and functional I ran into something. I went to program the lights and I was looking through the online pdf manual and it has the CV table, but doesn't give a value to add to make lights stay on in both directions. It should be in there some were cause I figured it out on my GP15-1, but I have forgot how to and I don't see it in there. Any help here?

    Ethan
     
  2. gstout

    gstout Member Frisco.org Supporter

    What manufacturer?

    GS
     
  3. Iantha_Branch

    Iantha_Branch Member

    Soundtraxx tsunami
     
  4. renapper (Richard Napper RIP 3/8/2013)

    renapper (Richard Napper RIP 3/8/2013) Passed away March 8, 2013

    I think the front headlight is on F0 and the Rear Headlight in on F1 Map both to the same Function switch either F0 or F1.
     
  5. Iantha_Branch

    Iantha_Branch Member

    I've got the beacon and head light set up together and they stay on in both directions, but the beacon is wired to the back head light output. The one I can't figure out is the gyro light on output 2, controlled by F5.

    Ethan
     
  6. klrwhizkid

    klrwhizkid Administrator Staff Member Administrator Frisco.org Supporter

    Ethan, with the headlights on the front headlight output, the Prime Stratolite on the rear headlight output, both on in both directions on F0, and the Gyralite on the Function 5 output mapped to F5, the CVs you need set are as follows:

    CV33 = 3
    CV34 = 3
    CV39 = 2
    CV50 = 136
    CV51 = 131

    Do you have the rear headlights connected to the front headlight outputs?
     
  7. Iantha_Branch

    Iantha_Branch Member

    Thanks Keith. I figured out cv's 33 and 34. Ill try the others when I get home.

    Ethan
     

Share This Page